Guide to Fix TP Link Extender Firmware Update Failure

TP Link Extender

“I’ve exhausted the manual procedure for updating the firmware on my TP Link extender without success. Something always gets in the way whenever I attempt to upgrade the firmware on my device via login page. So why is it always happening? To troubleshoot this problem, can you provide a hand?”

You have found the perfect article if you, too, have been unable to upgrade the firmware on your TP-Link wireless range extender by visiting Following the steps outlined above, you should have no problem fixing the firmware update failure issue on your TP-Link range extender. But before you can figure out how to solve the problem, you need to understand what got you to this point.

What Caused TP Link Extender Firmware Update Failure Issue?

Among the most frequent causes of firmware update failure for TP Link wireless range extenders are the following:

  • You haven’t carried out the firmware upgrade procedure properly.
  • Your TP-Link range extender can’t communicate with your router because the Ethernet wire is damaged.
  • You have your TP-Link extender located far away from your home router.
  • There are disruptions in either the router’s or the extender’s signals.
  • There are times when you won’t be able to update your extender’s firmware due to technical glitches.

Read on to find out why updating the firmware on your TP Link extender is failing and what you can do about it.

[Fixed] TP Link extender Firmware Update Failure Issue

  1. Restart the TP Link Extender

If it has been a while since you restarted your WiFi range extender, please do it immediately by following the detailed steps provided below:

  • To stop using the extender, unplug it from your home network.
  • Disconnect the power cord from the wall and switch off the extension.
  • Let’s pause for a moment.
  • Connect the power cord to the wall outlet and turn on the extender.
  • It seems like you need to reconnect the extender to your home network.

Now, check if you are able to update the firmware of your wireless extender.

2. Replace the Ethernet Cable

Your device’s signals won’t transfer correctly in case the Ethernet connection between the TP-Link wireless range extender and the home router is unstable.

To solve the problem, it is advised that you replace the Ethernet with a fresh new one. After that, see whether you can upgrade the firmware by accessing the TP-Link setup wizard.

3. Bring Your WiFi Devices Closer

Verify that your wireless range extender and home router are in close proximity to one another and that your network is stable. Otherwise, I’m afraid you’ll face even greater difficulty than the one you’re facing right now.

4. Eliminate WiFi Interference

Avoid placing your TP-Link extender or home router in close proximity to any wireless devices such as cordless phones, washing machines, baby monitors, Bluetooth speakers, treadmills, TVs, refrigerators, microwaves, etc. Also, keep your electronics away from shiny, reflective surfaces like mirrors and aquariums.

Instructive Guide to Perform Rockspace WiFi Extender Setup

How to Perform Firmware Update?

  • Invoke a web browser and look around online.
  • Update your TPLink range extender’s firmware to the most recent version.
  • Type the extender’s default web address into the browser’s address bar.
  • To proceed with the entry, press the Enter key.
  • If you click that link, you’ll be sent to the TPLink range extender’s login page.
  • Simply type in the predefined username and password and click the Log In button.
  • Choose Firmware Upgrade from the list of System Tools.
  • To begin, choose the Browse tab.
  • The firmware file you downloaded previously will be installed.
  • Click the Download button.

Sum Up

Try updating the firmware on your extender using the TPLink app if you’re still having trouble trying to update the firmware. All you need to do is, access the TPlink extender app login page, and follow the on-screen instructions.

Leave a Reply

Your email address will not be published. Required fields are marked *